My Setup & Equipment

All Quotes include a full sound & lighting Rig. I try and offer this below as a  standard set-up to every customer but this is subject to available space at venue.

 

 

Sound System

SPECIFICATIONS
LT812SAT
System type: 2-way vented enclosure
High Frequency Device: 1” compression driver with 1" VC
Low Frequency Device: 8” woofer with 1.5” VC
Angular Coverage: 60° H x 40° V
Total peak power: 1600 W
Amplifier Continuous Power: 2 x 200 W Class AB
Power Supply: SMPS
Processing: Analog
Frequency Response: 45 Hz - 20 kHz
Max SPL: 121
Dimensions (W x H x D): 220 x 442 x 260 mm.
LT812SUB
System type: Vented sub-woofer
Low Frequency Device: 12” woofer with 3” voice coil
Total peak power: 1600 W
Amplifier Continuous Power: 400 W Class D
Power Supply: SMPS
Processing: Analog
Frequency Response: 45 Hz - 20 kHz
Max SPL: 124

Lighting Rig on a "Goal Post" crossbar consists of

4 High power QTX Led PAR56 cans. Run in full DMX mode.

A pair of Acme Dynamic 25w Barrel Rolls. Run as a pair again in full DMX mode.

ADJ Quad Phase HP completes the line up. High power with a massive output makes this fixture an ideal centre piece.